Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Exporting geometry (axisymmetric with twist)

Status
Not open for further replies.
JHJ0120

JHJ0120

Materials
Joined
Sep 15, 2009
Messages
1
Location
KR
Hi,

I'd like to export the deformed geometry from ODB file to remesh manually.
But I can't export the axisymmetric geometry include twist by PartFromOdb command.
It made the part which don't include the information about twist.

I know that using 3D model is easier way, however I need to twist and remesh the model in 2D.

Please help me.
 
Status
Not open for further replies.

Similar threads

IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
10K
IcarusAero223
IcarusAero223
P
  • Locked
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
Exporting abaqus file
Replies
1
Views
348
FEA way
FEA way
E
  • Question Question
Dealing with STL files
Replies
2
Views
699
mj345
mj345
abc123ali
  • Locked
  • Question Question
Error in exporting data
Replies
3
Views
391
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top