Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extruding Polymer over Metal Coil

Status
Not open for further replies.
MatEngTED

MatEngTED

Materials
Sep 27, 2004
24
US
Looking for a polymer to extrude over a metal coil. Material must be gamma sterilizable to 90 kGy, Coil is approximately 10 ft. long and 0.1 in. in diameter. Material must be low cost.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Try thermoplastic Polyurethane, for example Desmopan from Bayer. They have medical grades with may be irradiated.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded / Extruded Hytrel
Replies
0
Views
38
Buckshott00
Buckshott00
kamazanka
  • Locked
  • Question
Fundamental understanding of how polymer biochar blends work
Replies
0
Views
37
kamazanka
kamazanka
Senin
  • Locked
  • Question
Polymer Melt Spinning
Replies
0
Views
24
Senin
Senin
alan g
  • Locked
  • Question
Quantifying degree of polymer melt mixing
Replies
0
Views
21
alan g
alan g
andradesilva
  • Locked
  • Question
how to design and manufacture polymeric shells to be inflated later
Replies
3
Views
20
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top