Sep 21, 2017 #1 212197 Mechanical Jun 2, 2007 124 What is exact significance of factor C in FOLLOWING FORMULA of UG 34 of ASME sec VIII DIV1? t = d x square root (CP/SE)
What is exact significance of factor C in FOLLOWING FORMULA of UG 34 of ASME sec VIII DIV1? t = d x square root (CP/SE)
Sep 21, 2017 #2 A.I. BP Mechanical May 20, 2017 4 Take a look back at Figure UG-34 c factors are given for the different acceptable designs. Upvote 0 Downvote
Sep 21, 2017 #3 SnTMan Mechanical Jan 22, 2005 6,794 212197, recommend you refer to Rourkes' for flat plates. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand Upvote 0 Downvote
212197, recommend you refer to Rourkes' for flat plates. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand
Sep 21, 2017 #4 TomBarsh Structural Jun 20, 2002 1,003 I'm thinking it is this Roark's that is intended https://www.barnesandnoble.com/p/ro...Google_&sourceId=PLGoP20432&k_clickid=3x20432 not this one http://www.orourkespubhouse.com/ Upvote 0 Downvote
I'm thinking it is this Roark's that is intended https://www.barnesandnoble.com/p/ro...Google_&sourceId=PLGoP20432&k_clickid=3x20432 not this one http://www.orourkespubhouse.com/
Sep 21, 2017 #5 SnTMan Mechanical Jan 22, 2005 6,794 OK, TomBarsh, ya got me... I'm buyin' a round The problem with sloppy work is that the supply FAR EXCEEDS the demand Upvote 0 Downvote
OK, TomBarsh, ya got me... I'm buyin' a round The problem with sloppy work is that the supply FAR EXCEEDS the demand
