Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fan Relay Thermoswitch

Status
Not open for further replies.

tomcurnow

Automotive
Nov 11, 2003
2
US
I am looking for the actual manf of thermoswiths that engage at 185 degrees and 200

the factory OE type are higher, aftermarket fan mfg have what I want but I need several for a different type project
 
Replies continue below

Recommended for you

This maybe an alternative to your need.
In most ordinary electronic-components shop there are several bi-metalic thermo-switches of different temperature level. The sizes are about the same with a power transistor 2N3055, also with two holes for the screws. What I have in my drawer are that with temp. level 55 degree Celsius, 60, and 80. There seems more of other temp. levels available in the shops. It is for dry environment and need an additional one transistor circuitry since the switch is "normally on(NO)".
SUNAN
 
hi ,,
well i'm from a very hot climate where we use these stuff alot ,, try to check foxboro or the roesemount .. they are the best .... check for the PT 100 RTD ...It is best relaiable and accurate..
ahmed
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top