Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FAQ Question http://www.eng-tips.com/faqs.cfm?fid=1339

Status
Not open for further replies.

MahenArul

Mechanical
Nov 28, 2014
1
Hi,
I have tried to re-run the example and the calcs shown in this FAQ but I could not get the answer. I am getting different value if use 100 and 10 for; ΔP=0.19 MPa =~ 2 bar for the light container

ΔP=0.39 MPa =~ 4 bar for the heavy container

Can somebody help me out please?

Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor