Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fastener modeling in Patran

Status
Not open for further replies.
Sia27

Sia27

Civil/Environmental
Jan 8, 2015
5
How do I model fastener like rivet in MSC/Patran? I am modeling my section in Patran and then submitting it to Abaqus for analysis. What is the equivalent of the "Mesh independent fasteners" in Abaqus that I can find in MSC/Patran?

Thank you.
 
Status
Not open for further replies.

Similar threads

N
  • Question
ABAQUS FASTENER
Replies
1
Views
1K
FEA way
FEA way
abc123ali
  • Question
Different results in cohesive zone modeling for the same data input
Replies
8
Views
3K
FEA way
FEA way
M
  • Question
Modeling elasto-plastic behaviour of NiTi
Replies
1
Views
1K
FEA way
FEA way
robertt3
  • Locked
  • Question
Plastic modeling only by Abaqus built-in property settings
Replies
8
Views
194
robertt3
robertt3
Wonder_Women
  • Locked
  • Question
Modeling Kinematic hardening model for steel in Cyclic analysis
Replies
3
Views
172
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom