Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FEA verification: Uniformly loaded circle plate (simply supported at the edge)

Status
Not open for further replies.
Shu Jiang PEng SE

Shu Jiang PEng SE

Structural
Apr 29, 2008
229
A 0.5” thick and 40” diameter circle plate is simply supported at its edge and the uniformly is 5psi. The maximum stress of the plate from ANSYS is verified with theoretical solution ((formula is from p.141, Strength of materials, part II, advanced theory and problems, second edition, by S. Timoshenko).

The two figures show the bending stress distribution in Cylindrical coordinate system and Cartesian coordinate system respectively.
1_ydefhh.jpg

2_rzjshn.jpg
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

nashki
  • Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
Eranho
  • Locked
  • Question
How to get Circle centers from Named selection group 2023R2 Discovery/Spaceclaim
Replies
0
Views
221
Eranho
Eranho
X
  • Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
875
xinyu3liu
X
bkal
  • Locked
  • Question
Mode Selection Based on the Mode Coefficients
Replies
0
Views
239
bkal
bkal
andradesilva
  • Locked
  • Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
291
gnc89
gnc89

Part and Inventory Search

Sponsor

Back
Top Bottom