Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Feature Palette Listing Style 2

Status
Not open for further replies.

CorBlimeyLimey

Mechanical
Joined
Nov 5, 2003
Messages
15,292
Location
CA
Does anyone know if the list in the Feature Palettes can be changed per the Windows Explorer options. i.e. Thumbnails, Tiles, Icons, List, Details.

I dislike using the FP because it uses the Icon style & I prefer List. Also it does not handle configurations of parts or assemblies.

[cheers] from (the City of) Barrie, Ontario.

[ponder] If you choke a smurf, [smurf] what color does it turn?
 
Does anyone know if the list in the Feature Palettes can be changed per the Windows Explorer options. i.e. Thumbnails, Tiles, Icons, List, Details.

Not to my knowledge - ER

Also it does not handle configurations of parts or assemblies.

I beg to differ. If you open the FP SW parts that come with SW by default and drag one of those parts into and assembly it will give you a menu "Select a configuration to be used". This would have too indicate that it does support Configs. I tested one of my parts and assemblies that has configs and it worked fine for both parts and assemblies.

Best Regards,

Scott Baugh, CSWP [borg2]
CSWP.jpg

faq731-376
 
Well what do you know!!! [surprise]

I stand corrected ... thanks Scott. [thumbsup2]

Hmmm ... Now I have to fathom out where I got that snippet of misinformation from. [evil]

[cheers] from (the City of) Barrie, Ontario.

[ponder] If you choke a smurf, [smurf] what color does it turn?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top