Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FeatureManager Search and Component Display options
- Thread starter deschamos
- Start date
CorBlimeyLimey
Mechanical
I can only offer workarounds;
1) Temporarily add a dummy part, with the search parameter in its name, to the sub-assy.
2) Split the FM to show two trees. Use one panel to perform the search, and group select to highlight all selections. Then, from the other panel, select the sub-assy and activate the Isolate tool.
1) Temporarily add a dummy part, with the search parameter in its name, to the sub-assy.
2) Split the FM to show two trees. Use one panel to perform the search, and group select to highlight all selections. Then, from the other panel, select the sub-assy and activate the Isolate tool.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question