feeds_speeds library

[berri]

Hi guys,

Can I customase two feeds_speeds libraries, separated on

NXCAM?

I mean, one library for one material and the second

library for other type of material. And clicking

a customized icon, I can load one library or the other

library.

Thanks.

 

[markrief]

Part material is one of the keys in the database, so it is all in one file. The search is based on part material, tool material, and cut method.

Hint - use "Set Machining Data". Do not use "Reset from Table"

Mark Rief
Product Manager
Siemens PLM

 

[berri]

Hi Mark,

I have explained badly. I want to know if I can customize two

feeds_speeds libraries, independet each one.

I mean one library for one purpose, feeds_speeds_1.

For another purpose, feeds_speeds_2 library.

It this possible?

Thanks.

 

[markrief]

You can habve multiple libraries bu having multiple CAM configurations. Each one can connect to a different library.

Mark Rief
Product Manager
Siemens PLM

 

[berri]

Dear Mark,

How can I customize multiple CAM configurations on NX?

I have seen the NX help but I don't understand the steps,

for customizing the diferent libraries.

Thanks.

 

[berri]

Hello Mark,

I think that you mean to customize all libraries in this folder,

C:\Archivos de programa\UGS\NX 6.0\MACH\custom

On the custom folder, put feeds and speeds_1 .dat archive, and change the library rutes on mach_custom_readme.txt.

I am not sure, maybe on some UGII archive I have to change de rutes too, for feeds and speeds library.

Thanks.

 

[markrief]

The procedure of making copies is the same for the feeds and speeds library as for the tool library that I explained in your post last November.

In the configuration file, change LIBRARY_FEEDS_SPEEDS key instead of LIBRARY_TOOL.

Mark Rief
Product Manager
Siemens PLM

 

[berri]

Hello Mark,

Can I ask you which is the configuration file,

is on UGII directory? I am bit lost with these customizations.

Thanks.