Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Femap, changing names of solids

Status
Not open for further replies.
Grozozo

Grozozo

Student
Feb 8, 2022
11
Hello there!

Kinda trivial question. How to disable Femap to automaticly change names of solids after changing geometry of some part (slicing, cutting, combining surfaces etc.)?

Thanks in advance,

Grozozo.
 
Status
Not open for further replies.

Similar threads

test123123
  • Locked
  • Question
[FEMAP] How to connect a gap
Replies
0
Views
81
test123123
test123123
alex2000junio
  • Locked
  • Question
FEMAP Static Analyses + Temperature
Replies
1
Views
105
Gr8blu
Gr8blu
test123123
  • Locked
  • Question
[FEMAP] sol111 does not run even though the frequency table exists.
Replies
1
Views
176
rb1957
rb1957
B
  • Question
Wrinkling of Membrane Patran
Replies
0
Views
2K
bagnaedo
B
Thism
  • Locked
  • Question
CATIA V5 Drawing : Changing default dimension style
Replies
0
Views
48
Thism
Thism

Part and Inventory Search

Sponsor

Back
Top Bottom