Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
fha deviation.
- Thread starter soo74
- Start date
The fHa is the alignment error of a best straight line drawn from the start of the active profile to the end of the active profile of a charted gear tooth involute. Of itself, it doesn't tell you much unless you take the form variation (ffa) and the required quality of the charted involute into consideration with it.
I hope that helps.
I hope that helps.
- Status
Similar threads
- Locked
- Question