Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ficep 504 punch lifetimes
- Thread starter billfh
- Start date
Tool life in almost all cases is based on the material you are punching, turning, drilling or whatever operation you are doing. It also depends on how you apply the tool. In this case the centrality of the punch to the die, the clearance on the die, if you are punching the complete hole or nibbling a partial hole and other considerations. You will have to learn with experience.
Bill
Bill
- Status
Similar threads
- Locked
- Question
- Locked
- Question