File format for Intel 87C196 microcontroller

[BrianG]

Hi folks,
Apologies for mutiple posting but it's difficult to know where best to post this query.

We have an old product which uses the 87C196 microcontroller and I need to program some more blank parts for spares. The problem is I can't be sure of the correct hex file format to setup on our Data I-O 2900 programmer for reading in the file from disk.

The file header looks like this:

:02203800F63F71
:01201800FFC8

which is very similar to Intel Hex-32, but not exactly as the second line seems to be missing two characters for the extended address.

Does anyone out there have any ideas?

 

[melone]

Intel MSC Hex....

 

[jbartos]

Suggestion: Visit

http://www.signatec.com/products/centers/3rdpartysoft.asp

http://www.hunteng.co.uk/legacy_products/software/ticc4x.htm

for: The hex conversion utility allows you to convert an executable COFF output file into ASCII-Hex, Intel MSC-86, Extended Tektronix, Motorola-S, or TI-Tagged Object file format that can be used as input to an EPROM programmer.

etc. for more info