Jan 23, 2013 #1 pinoyce Civil/Environmental Jan 9, 2013 13 How do you guys test fillcretes? My cap always comes off even though the temperature is right.
Jan 23, 2013 1 #2 Ron Structural Sep 24, 1999 16,336 Depends on the expected strength. If in the 500 psi range and below, don't cap them....just sand the ends flat on medium to coarse sandpaper. Upvote 0 Downvote
Depends on the expected strength. If in the 500 psi range and below, don't cap them....just sand the ends flat on medium to coarse sandpaper.
