Filler Metal between Stainless Steel and Carbon Steel

[david97]

Please can someone guide me as to where can i get information on Filler metal in ASME Books.

Filler material is between stainless steel and carbon steel
Shell - SA 240 316L
Lifting Lug - SA516 GR.70

MAWP is 10 BAR at 120 degree celcius. I think the filler material is 309 stainless steel as I read previous forums.
But is this information shared in ASME code or is it jst on experience.

Any views greatly appreciated

 

[0707]

E309Mo-15 or 310Mo-15 will be a good choice

luis marques

 

[metengr]

Try AWS SFA 5.9 E309L-18.

 

[metengr]

E309L-18

E309L-15

Oops, my typo, the last two digits should be 15 for all position welding using this filler metal.

 

[vesselfab]

either the 309l material or the 309lMO helps raise the mo content to more readily match the 316L chemistries

 

[littlechickend]

you should refer to ASME Sec. II part C for " Specifications for welding rods, electrodes and filer metal.

regards.

 

[littlechickend]

you should refer to ASME Sec. II part C for " Specifications for welding rods, electrodes and filer metal.

anyway it is also based on welding process performance.

regards.

 

[MJCronin]

Suggest that you repost in a forum dealing specifically with materials and welding

-MJC

 

[david97]

Thanks you guys and thanks littlechickened.

Apologies went out for holidays plus christmas is on the way..

Fawked- Yes it is in weld procedure but I just wanted to know if I can use something better or from where can I learn more about filler metals.

I guess now it is left for me to do lot of reading on ASME sec II -C.

 

[2468jjcr]

Try Section-II-D, Nonmandatory Appendices A.(METALLURGICAL PHENOMENA).A-440 (c).