Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flange connection

Status
Not open for further replies.

RMERMP

Mechanical
Feb 22, 2016
45
Good day,

can you please direct me where can i read code about installation of flange connection. thanks
 
Replies continue below

Recommended for you

Fire sprinkler?

Connecting underground to aboveground or something else??
 
@cdafd

connection in fire main. the limitations (length of pipe) on where i can use flanges, threaded or welded connection. and distance of the flanges to the wall.
 
Is this for all underground??

Look at NFPA 24

Or connecting underground to aboveground???
 
Flanges can generally be used anywhere. As far as distances to walls, you need to know the size of the flange, then give enough distance for an installer to be able to use tools to install.

For example, a 6" flange has an 11" outside diameter. You could push it as close as 6" centerline to a wall. However, your installer may want to beat you with it as it will be difficult, to near impossible to install.

Travis Mack
MFP Design, LLC
"Follow" us at
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor