Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flange Groove Inlay

Status
Not open for further replies.
Mechh007

Mechh007

Mechanical
Jun 21, 2012
41
AE
Hi,
As per our client spec there is no detail about groove inlays for API 6BX flanges and we placed the material orders without inlays. Is it ok? The flange material is AISI 4130 and gasket material is SS16.


Thanks,
BN
 
Replies continue below

Recommended for you

Sort by date Sort by votes
It depends on what material class of the body want to become.
If the body was expected to have material class HH, then you have to apply cladding on the groove.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AMINATAISSA
  • Locked
  • Question
Choosing between forged and fabricated from plate nozzles flanges and flange.
Replies
4
Views
44
EdStainless
EdStainless
ASDcunha
  • Locked
  • Question
Reduction of Norsok Compact (L-005) Flange length from 75 mm to 55 mm by cutting 20 mm 2
Replies
2
Views
24
davefitz
davefitz
Ishack
  • Locked
  • Question
Through thickness crack on Inconel 625 Forged Flange
Replies
10
Views
30
mfgenggear
mfgenggear
CREERAAM
  • Locked
  • Question
WELDOLET TYPE TEE'S GROOVE's INSIDE NOT WELDED 1
Replies
5
Views
6
CREERAAM
CREERAAM
ryanvg42
  • Locked
  • Question
Nipoflanges, Flange olets, Long Weld Neck Flanges
Replies
3
Views
6
XL83NL
XL83NL

Part and Inventory Search

Sponsor

Back
Top