I am currently sizing the LP flare KO drum for an offshore project. In this particular instance, all potential discharges to the LP flare system are vapour only. In this case, is there any requirement to have a KO drum? If there is - what is the sizing basis for the liquid hold-up section? Thanks.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flare Drum Liquid Holdup
- Thread starter bth1
- Start date
Similar threads
- Locked
- Question
- Locked
- Question