Flexible sub-assembly and Solidworks 2008

[maxb]

Hi all, I don't know if it's me but I can't find the flexible option for sub-assembly.

Do you have the same problem?

thanks

maxb

 

[JMirisola]

When you RMB on the sub-assembly and select properties, the option isn't there?

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M

 

[maxb]

Hi Jeff, yes the option is supposed to be there like Solidworks 2007, but in 2008 when you right click on part or sub-assembly you don't have the properties "button".

thanks

maxb

 

[CorBlimeyLimey]

Do you still have the Customize button? If so it may just need to be selected from that list.

 

[JMirisola]

That's right...it's there but not where it was. In the "head's up" box, there's an icon that looks like a hand pointing at a piece of paper, that's your component properties button. And, I just checked, solve as flexible is still there.

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M

 

[JMirisola]

I forgot to mention when you RMB on the sub-assembly, in the head's up box...yada, yada, yada.

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M

 

[SBaugh]

Did you check the new "context menu" when you RMB?

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[maxb]

Hi all, Jeff found the properties button

thank you to all for fast reply.

maxb