Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Floating Suction System 3

Status
Not open for further replies.

APPI44

Mechanical
Feb 9, 2007
4
Can someone out there please help with me these
1) Data Sheet (template) for Floating Suction System
2) Specification for Floating Suction System

 
Replies continue below

Recommended for you

Being a little more specific in what you are trying to do might be helpful
 
I am looking to add a floating suction to an existing tank. What I want to do is to prepare a spec and data sheet to purchase the floating suction. I need a sample data sheet and a spec which I can modify to suite my condition.
 
Hello everybody:

APPI44, this site can be of some help for you Click on "Products" and after fill in some data (language, contry, etc.) you will find Storage Tank Equipment.

Good luck !
 
Isn't writing a spec and a data sheet for a floating suction a little overkill.

I purchased about a dozen tanks recently that had many floating suctions. All I specified was the minimum float height, maximum float height, outlet nozzle location, pipe diameter and material. For an existing tank, you would have to specify tank diameter too. Send this info to a tank vendor and see what they come back with.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor