bluenote49
Mechanical
Is it ideal not to isolate a PLATE HEAT EXCHANGER on a hot water system when flushing and chemical treatment will be applied to the network?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flushing and Chemical Treatment of Hot Water Pipes
- Thread starter bluenote49
- Start date
- Status
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
