Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

flushing ring gasket

Status
Not open for further replies.
arnie77

arnie77

Electrical
Jul 18, 2014
2
0
0
CA
hello, can anyone explain what is the torque value to use if i have two type of gasket one on each side of a flushing ring. one gasket is spiral wound and the other is graphoil as default gasket provided by rosemount level transmitter diaphram seal. Is this a common practice to have one type of gasket on each side of a flushing ring.

thanks,
 
Status
Not open for further replies.

Similar threads

Mintle
  • Locked
  • Question
Thread Ring Gage Help
Replies
2
Views
21
Tmoose
Tmoose
Josh Blank
  • Locked
  • Question
Using an O-Ring to seal on an NPT lead chamfer - Design Improvement Ideas
Replies
10
Views
21
Tmoose
Tmoose
timsch
  • Locked
  • Question
Ring Joint flange - Ultrasonic testing of RJ groove face
Replies
5
Views
22
MrPSK
MrPSK
jhonwyn73
  • Locked
  • Question
Alternate gasket as replacement for insulation one
Replies
0
Views
7
jhonwyn73
jhonwyn73
mnthiraviam
  • Locked
  • Question
Gasket difference
Replies
2
Views
3
mnthiraviam
mnthiraviam
Back
Top