flux & electrode wire 1

[lahane1443]

i have to qualify a PQR for welding of A182F316\316L to A312 TP 316\316L with SAW process. what is the associated flux & wire for the same.Impact test also required at -196 deg C

 

[metengr]

Check with your local welding consumables/products supplier. You have several options depending on equipment and set-up.

 

[lahane1443]

SFA number will help me find it?

 

[metengr]

Ask your supplier for advice. You can contact esab below

http://www.esab.com/de/de/support/upload/XA00136020-Submerged-Arc-welding-handbook.pdf

 

[Guest102023]

Sorry you will need a little more than flux+wire to succeed with SAW on SS, but good luck.

 

[lahane1443]

what else is required other than flux & wire to succeed in SAW

 

[Compositepro]

Skill and knowledge.