Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

focusing vs. depth of field. 1

Status
Not open for further replies.

jabonet

Mechanical
Oct 9, 2002
36
I´m building a pin hole camera. if you use a very small hole, 0.2 mm, and end up with a f 1000´s.
I can use a lens with a focal distance of 15 cm to 30 to have a bigger aperture but still a big enough depth of field so that I don´t have to worry about focus.
In other words, can anybody tell me the way to calculate depth of field, for different apertures and lenses?

thanks.
 
Replies continue below

Recommended for you

exactly what I was looking for, and more. thanks!

Javier
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor