Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fonts in I-deas 11NX
- Thread starter Mareek
- Start date
This is straight from UGS' website:
PRODUCT: IDEAS
SUBJECT: I-deas9m2: Adding additional font in wireframe font command.
SUBMITTED BY: XXXXXXXXXX SUBMITTED DATE: 01/17/2003
IR #: XXXXXXX DOCUMENT ID: 001-4696421
PLATFORM: INTEL OPERATING SYSTEM: WINDOW
OS VERSION: 2000_SP2 PRODUCT VERSION: V9M2
===============================================================================
HARDWARE/SOFTWARE CONFIGURATION
-------------------------------
Family : I-DEAS
Application : DESIGN
Function : MASTER_MODELER
Subfunction : ALL
Release : V9M2
Platform : INTEL
OS : WINDOW
OS Version : 2000_SP2
SYMPTOM/PROBLEM
---------------
How to add more font style to Wireframe Font command.
SOLUTION/WORKAROUND
-------------------
Turn on the param_file setting: usenttruetypefonts: 1, this shows up all of
the true type fonts that Windows has. There may be some fonts that I-deas
won't like. That is mentioned in the on-line help.
If you would like to add more fonts, add them to the WINDOWS\FONTS directory.
If Windows accepts that it is a font, I-deas should then accept it. If like to
create own font, need to get a font creation program, a third party product
that should be able to find in the market. There has been shareware versions
of these offered as well.
You cannot add any additional fonts to the forms (outside of the true type for
Windows). So if you have one on Unix, it cannot be added.
REFERENCES/NOTES
----------------
Note: param_file= ideas_param9 found under /team/mstr/config directory.
===============================================================================
Tim Flater
Senior Designer
Enkei America, Inc.
PRODUCT: IDEAS
SUBJECT: I-deas9m2: Adding additional font in wireframe font command.
SUBMITTED BY: XXXXXXXXXX SUBMITTED DATE: 01/17/2003
IR #: XXXXXXX DOCUMENT ID: 001-4696421
PLATFORM: INTEL OPERATING SYSTEM: WINDOW
OS VERSION: 2000_SP2 PRODUCT VERSION: V9M2
===============================================================================
HARDWARE/SOFTWARE CONFIGURATION
-------------------------------
Family : I-DEAS
Application : DESIGN
Function : MASTER_MODELER
Subfunction : ALL
Release : V9M2
Platform : INTEL
OS : WINDOW
OS Version : 2000_SP2
SYMPTOM/PROBLEM
---------------
How to add more font style to Wireframe Font command.
SOLUTION/WORKAROUND
-------------------
Turn on the param_file setting: usenttruetypefonts: 1, this shows up all of
the true type fonts that Windows has. There may be some fonts that I-deas
won't like. That is mentioned in the on-line help.
If you would like to add more fonts, add them to the WINDOWS\FONTS directory.
If Windows accepts that it is a font, I-deas should then accept it. If like to
create own font, need to get a font creation program, a third party product
that should be able to find in the market. There has been shareware versions
of these offered as well.
You cannot add any additional fonts to the forms (outside of the true type for
Windows). So if you have one on Unix, it cannot be added.
REFERENCES/NOTES
----------------
Note: param_file= ideas_param9 found under /team/mstr/config directory.
===============================================================================
Tim Flater
Senior Designer
Enkei America, Inc.
- Status
Similar threads
- Locked
- Question