zl1franco
Structural
- Nov 12, 2004
- 3
Hello,
We are using some 6" dia., 0.5" thick Duro50 and Duro70 (Shore A) Neoprene pads for various boundary conditions on a test structure in our lab. We have already performed force vs. displacement plots using our UTM (to obtain pad vertical stiffness values) and were looking for some published/manufacturer plots (or values) to compare with. I posted this question in here since we are using the same pads that are used for typ. concrete cylinder tests, hoping someone might have some info. or suggestions.
Thanks!
We are using some 6" dia., 0.5" thick Duro50 and Duro70 (Shore A) Neoprene pads for various boundary conditions on a test structure in our lab. We have already performed force vs. displacement plots using our UTM (to obtain pad vertical stiffness values) and were looking for some published/manufacturer plots (or values) to compare with. I posted this question in here since we are using the same pads that are used for typ. concrete cylinder tests, hoping someone might have some info. or suggestions.
Thanks!
