formable alloy steel sheet recommendation

[mechengdude]

If anyone could recommend material(s) to meet the following requirements, it would be appreciated:
1. Steel
2. Must be formable (90 degree bend max)
3. 50Ksi yield minimum
4. Corrosion resistance is a non-factor
5. Cost not a hard requirement but cheaper is better
7. Thickness range approximately .050"

Regards

 

[TVP]

HSLA steels are probably the lowest cost option for this strength range. Official designation is either HSLAS Grade 50 according to ASTM A1011 or 340X according to SAE J2340.