Format of Hole Notes

[UKIDIOT]

I have a question about hole notes. I would like to change the default format that Wildfire 2 puts hole notes in. I know that you have to change it in the .hol files, but I don't know what to put in there. Also is there a config option that I need to change in order for it to read it correctly. Any help would be greatly appreciated.

Thanks

 

[looslib]

Learn to use the PTC knowledge base! There is a lot of information there that will save you lots of time.

These discuss Hole Formatting:

http://www.ptc.com/cs/help/proengin...roe/part/feature5/formatting_thread_notes.htm

http://www.ptc.com/cs/tpi/107248.htm

"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[UKIDIOT]

Do you have to subscribe to it? Because I don't have a Username or password for it.

 

[looslib]

It is a free subscription.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[Guest0527211403]

NB: PTC Knowledge Base is for Maintenance PTC customers only.

 

[UKIDIOT]

Thanks, for all the help. It worked great. My next question is about adding the countersink and couterbore to the note. I can get it to put a counterbore in the note. But when there isn't a cbore it still shows the symbol. How do I get it to recognize if there is/isn't a cbore, or csink? Also how do I get the symbol for csink (like cbore which is: <CTRL-a>v<CTRL-b>)?

Thanks for the help.