Forming Tools Folder

[Dman5]

I need to access forming tools folder to create a dimple on my sheet metal part. Am unable to locate this folder in design library. I am using version 2011 solid works.
Thanks in advance

 

[CorBlimeyLimey]

Make sure the Tools > Options > System Options > File Locations is pointing to the correct folder.

 

[DiegoLGraves]

D, I keep my design library on my local drive, in my documents/SW2011 library/design library. I don't remember if that is the default location. Once you locate it you will need to right click on the forming tools folder from within SW and check the forming tools option. You may need to restart SW for it to take effect.

Diego