Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Freeze Plug Spec.

Thread starter daxmann
Start date Jun 16, 2015

Status: Not open for further replies.

Jun 16, 2015

daxmann

Aerospace

I'm installing a freeze plug for a double drilled hole. The plug will be made from 7075-T6 bare, .50 in length, countersunk and .0021 to .0023 larger than the hole per my Liaison hand book. I work for a small company we can't make our own bushings. I'm hoping someone her can help me out with the proper MIL SPEC or NAS Standard call out so we can purchase the proper diameter bushing. Thanks for all the help.