saoudiabdenour
Industrial
- Jun 21, 2014
- 2
hi,
I need your help to make my simulation braking.
I put all the conditions aus limistes rotating disc and the pressure force on the plate and friction = 0.2.
but my problem is how can I cool the pad and the disc so that the temperature will be constant after some time simulation.
I also put the forced convection on the disc and natural on the board, the ambient temperature is 20 with emissivity.
waiting for your solution
I need your help to make my simulation braking.
I put all the conditions aus limistes rotating disc and the pressure force on the plate and friction = 0.2.
but my problem is how can I cool the pad and the disc so that the temperature will be constant after some time simulation.
I also put the forced convection on the disc and natural on the board, the ambient temperature is 20 with emissivity.
waiting for your solution