Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
friction coefficient of steel roller bearings
- Thread starter Maldini
- Start date
Re: Friction coefficient of steel roller bridge bearings
The normal friction cooefficient for the steel rollers could be taken as 0.03 for well finished 9machined) elements. In the design also assume corroded condition, and in this case your friction could be as high as 10-15% (static). Use the second to design anchor bolts.
The normal friction cooefficient for the steel rollers could be taken as 0.03 for well finished 9machined) elements. In the design also assume corroded condition, and in this case your friction could be as high as 10-15% (static). Use the second to design anchor bolts.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
