Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Friction Stir welding Simulation- Flash after Welding? 1

Status
Not open for further replies.
cvhar87

cvhar87

Marine/Ocean
May 16, 2011
2
Hi, I am trying to simulate FSW process in Abaqus CAE. Attached is the input file for the same. I am trying to get flash after welding is completed in step-1(Coupled thermo mechanical analysis). I have tried several runs with different time period, but in vain, each resulting in convergence error. Any suggestions would be helpful.

Thanks,
Vish
 
Status
Not open for further replies.

Similar threads

M
  • Question
Concrete friction
Replies
1
Views
1K
FEA way
FEA way
Gov45
  • Locked
  • Question
Fatigue simulation
Replies
2
Views
362
Gov45
Gov45
Gov45
  • Question
Non linear fatigue simulation 1
Replies
7
Views
4K
FEA way
FEA way
Z
  • Question
Trying to simulate friction contact of two parts
Replies
13
Views
6K
zhuang joe
Z
mosta1
  • Locked
  • Question
Warping in FDM simulation
Replies
3
Views
266
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom