Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

From a point of view

Status
Not open for further replies.

jerry1423

Mechanical
Aug 19, 2005
3,428
Several years ago I saw a demonstration on how NX can show an operators point of view, such as from the drivers seat inside an excavator.
I also believe there is a John Baker video on YouTube demonstrating this, but I cannot locate it.
Does anybody know what NX calls this, so I can find it ?

Jerry J.
UGV5-NX1899
 
Replies continue below

Recommended for you

it was very similar to that . . . maybe I was dreaming here.
I will go into Fly-Though and see if I can find it form there.

Jerry J.
UGV5-NX1899
 
Search for something called the 'Eye Point'. It only works if you're a 'Perspective' mode. There's an option to define things as if you using a camera.

John R. Baker, P.E. (ret)
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor