Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

fuel tank sizing

Status
Not open for further replies.
andjelko

andjelko

Civil/Environmental
Jun 24, 2002
3
0
0
US
I am looking to size a fuel tank for a 10,000 gpm lift station. Any suggestions on what to keep in mind when designing this fairly large fuel tank? Above grade vs. underground? Location?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Refer to your state or regional Environmental regulations and guidelines and NFPA or other fire protection regulations as your guide.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

eski1
  • Locked
  • Question
Leaks in an ETP (Effluent Tank ) 1
Replies
4
Views
23
bimr
bimr
jaytelle
  • Locked
  • Question
Ventilation Rate for Closed Top Wastewater Tanks
Replies
2
Views
16
swazimatt
swazimatt
Januki
  • Locked
  • Question
Concrete tanks- Acceptance criteria for leak test in Belgium/Europe
Replies
1
Views
16
AlexEss
AlexEss
WARose
  • Locked
  • Question
Guessing the size of a septic tank 1
Replies
4
Views
8
TerryScan
TerryScan
zohl
  • Locked
  • Question
movement& construction joins in tanks
Replies
6
Views
8
JedClampett
JedClampett
Back
Top