celticmad
Mechanical
- Apr 10, 2003
- 10
Does anyone have any experience of using Fused Silica as a prime coat slurry and stucco in investment casting ?.
If so can you give me advice on achieving a very good surface finish ?.What is the ideal Viscosity and what grade or size stucco gives best results for very small nooks and cranny's
Many thanks in advance.
If so can you give me advice on achieving a very good surface finish ?.What is the ideal Viscosity and what grade or size stucco gives best results for very small nooks and cranny's
Many thanks in advance.
