Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fyrquel Change-Out

Status
Not open for further replies.

SloFlo

Mechanical
Sep 11, 2006
39
All,
We are looking at replacing our bearing oil, Fyrquel, with a Mobil DTE 797 or 832 and would like to know if there are any major pre-cautions that we should consider.
Thanks,
 
Replies continue below

Recommended for you

just curious, what type of equipment uses Fyrquel for lubrication?

I know lube oil contaminates Fyrquel and cause problems when passing throught servo valves, but have never heard of lube oil having problems with a little fyrquil in it.

I would gues the big thing would be material compatablity. if it is ground use fyrquil, viton works with either. note aviation fyqruil is completely different
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor