Jul 8, 2004 #1 3dboy Structural Dec 29, 2003 66 Does anyone know if there is a galvanic reation between stainless and zinc? 0
Jul 8, 2004 3 #2 boo1 Mechanical Oct 31, 2001 2,129 Yes, the zinc is ANODIC OR LEAST NOBLE that most SST's. See galvanic chart Go to http://www.mcnallyinstitute.com/04-html/4-1.html and look at the section an GALVANIC CORROSION or you take a look at Mil-Std-889 (available from the DoD at http://astimage.daps.dla.mil/quicksearch/). Upvote 0 Downvote
Yes, the zinc is ANODIC OR LEAST NOBLE that most SST's. See galvanic chart Go to http://www.mcnallyinstitute.com/04-html/4-1.html and look at the section an GALVANIC CORROSION or you take a look at Mil-Std-889 (available from the DoD at http://astimage.daps.dla.mil/quicksearch/).
Jul 9, 2004 Thread starter #3 3dboy Structural Dec 29, 2003 66 Thanks for the good sites, they are exactly what I needed. 0 Upvote 0 Downvote
