Gap between dimension and dimension line

[cubalibre000]

Hi,
why with standard tolerance, the gap is OK, but when I use ISO tolerance the gap increment ?
I tried to put the gap to zero, but nothing.
Solution ?

Thank you...

Using NX 8 and TC9.1

 

[Toost]

When you say gap, it's the distance between the "dimension text" and the dimension line you mean ?
I had a look and i get the same behavior. I think it's a case for GTAC.

Regards,
Tomas

 

[cubalibre000]

Adde to GTAC.
Each response will be added here for all NX user.

Thank you...

Using NX 8 and TC9.1

 

[cubalibre000]

Here the solution.
I don't like to manipulate setting, but better then nothing.

Thank you...

Using NX 8 and TC9.1

 

[JohnRBaker]

If we didn't expect that you may need to manipulate the settings we wouldn't have given you access to them ;-)

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[looslib]

Create a new style, save it and you are all set for the next time.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[cubalibre000]

John,
when I say that I don't like to manipulate the setting, I intend in this case.
Why if I put the ± 0.1 tolerance in the dimension the result is OK, but if I put the ISO tolerance, the result is different ?
Tolerance are bottom aligned to the dimension text ? If yes, why ISO tolerance increase the distance between the "dimension text" and the dimension line without editing style dimension setting ?

Thank you...

Using NX 8 and TC9.1

 

[cubalibre000]

Hi looslib,
the style is OK for all situation.
Only when I add ISO tolerance, this strange behavior require to me edit style dimension.
I don't like.

Thank you...

Using NX 8 and TC9.1