Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gas Boiler Combustion Efficiency

Status
Not open for further replies.

Shahid Ali

Mechanical
Jan 22, 2019
2
Hello Every one
I need your help regarding boiler combustion results, We have made the boiler combustion test from outsource, and they ve given us the following results

CO 10300(mg/Nm3)
Excess Air 26%
Oxygen 4.31%
Co2 23.5%
Stack Temp 190 centigrade
Combustion Efficiency 96.8%

I am bit confused when I read above results, I think these results or not right, may the instrument error
 
Replies continue below

Recommended for you

Dear Shahid Ali,

What is the capacity of the boiler?
Is it a package boiler?
What is the fuel used in the burners?
Does the boiler have air pre-heater?
Or a condensate pre-heater?

As a first look, the stack temperature (must be at the outlet) is way too high.

Regards.

DHURJATI SEN

 
Thank you DHURJATI SEN


The Boiler Capacity is 1200 kg/hr, package type boiler,and fuel is natural gas( GCV 960 BTU/SCF)
No any pre-heater( Condensate or Air) or Economizer installed,

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor