Gas consumption curve for 10MVA Gas Turbine Generators

[xchnauzer]

Hi all,
I'm trying to do a justification for building a new power plant and need to do a TCO comparison between the existing plant a new one.
To do this, i need to have a curve that shows the gas consumption at different loads for a 10MVA gas generator, specifically a Solar Mars 100. Alternatively, I could use discrete values at different loads.
Any information on this will be much appreciated.

xchnauzer.

 

[MortenA]

The solar web page (

http://www.solarturbines.com)

contains some info.

But there is only a 100% curve in the brochure you can download.

Best regards

Morten

 

[pmover]

contact you local solar rep and the rep will gladly furnish performance data for a mars 100 engine. fyi, at one time - as i do not know of they currently do, solar had programs for consulting/design engineers to utilize to determine fuel consumption, hp requirements, exhaust data, for the various engines solar mfgs. ask the solar rep for the program. short of that, i have a 1999 version that should provide reasonable results should you need/request that information. be specific on engine make though, solar makes two (at least they did) mars 100 engines.

good luck!
-pmover