Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
GASKET COMPATIBILITY
- Thread starter amanites
- Start date
Do not use EPDM or something similar.
Viton or NBR might be okay.
If you use rubber with a PTFE around it, please note that the PTFE will deform when pressed together, so it can not be used for connections that need to be opened every now and then.
Viton or NBR might be okay.
If you use rubber with a PTFE around it, please note that the PTFE will deform when pressed together, so it can not be used for connections that need to be opened every now and then.
- Status
Similar threads
- Locked
- Question