Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

GE Gas Turbine Frame 5 1

Status
Not open for further replies.

monam

Electrical
Oct 1, 2015
19
Dear Engineers.

I would like to know what are the parts ( Mech,Elec and instruments ) to be replaced in the major overhaul of GE Frame 5, 25MVA,18.5MW.?
 
Replies continue below

Recommended for you

Generally the hot parts of the engine would be exchanged for a refurbished set. Other than damaged / broken parts which would need to be rpelaced, the rest of the machine would be normally be cleaned, inspected, overhauled, calibrated, etc as required but not replaced. Auxiliary motors would have their bearings replaced I guess, and consumables such as filters and breathers would be replaced annually or on demand.

GE will give you a more definitive list - their manuals are pretty good, or speak to their service group.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor