May 23, 2006 #1 k1cart Mechanical May 23, 2006 5 Is there a method to creating helical gears in solidworks? I cannot find anything to help me with the process. Thanks!
Is there a method to creating helical gears in solidworks? I cannot find anything to help me with the process. Thanks!
May 23, 2006 #2 Theophilus Mechanical Dec 4, 2002 3,407 Won't a swept cut in a cylinder along a helical curve do the job? Then do a circular pattern of your swept cut. Jeff Mowry http://www.industrialdesignhaus.comReason trumps all. And awe trumps reason. Upvote 0 Downvote
Won't a swept cut in a cylinder along a helical curve do the job? Then do a circular pattern of your swept cut. Jeff Mowry http://www.industrialdesignhaus.comReason trumps all. And awe trumps reason.
May 23, 2006 #3 edreaux Mechanical Feb 7, 2006 89 Try GearTrax2006. It is a very helpful Solidworks add-on. You can download a 10 day trial at http://www.camnetics.com Upvote 0 Downvote
Try GearTrax2006. It is a very helpful Solidworks add-on. You can download a 10 day trial at http://www.camnetics.com
May 24, 2006 #4 SBaugh Mechanical Mar 6, 2001 6,685 GearTraxx is so worth the money! I used it for years and it made my life super simple! Regards, Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376 Upvote 0 Downvote
GearTraxx is so worth the money! I used it for years and it made my life super simple! Regards, Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")
