Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

geometric tolerancing exam

Status
Not open for further replies.

jobeth

Mechanical
Jan 14, 2000
70
I am interested in studying for the geometric tolerancing exam per Y14.5 M. Is there any recommended sites or study guides? Thank you in advance. Bill B.

William H. Bernhart, P.E.


I work as a development engineer for AMP - Tyco Electronics located near Harrisburg, PA. I help design interconnections and electrical connectors for aerospace applications.
 
Replies continue below

Recommended for you

Bill:

I have two references I feel are excellent:

One is Geometric Dimensioning and Tolerancing - Based on ANSI/ASME Y14.5M-1994 by David A. Madsen

The other book I have is a workbook that I was given when our office took a class on GD&T. Source is:
Al Neumann
Technical Consultants, Inc.
585 Gunwale Lane
Longboat Key, FL 34228-3709
Ph: 941-383-4283

Hope this helps and good luck.

Scott
 
Bill,

I have more references that should be helpfull.

Robert H. Nickolaisen, has a "GD&T Certification Preparations Study Guide", checkout his website,
Alex Krulikowski, he is another with reference material on the subject of GD&T, website,
Don Day, checkout his website,
I hope this helps, I myself will be taking the Senior Level test shortly.

Ed
 
Thank you!!!

William H. Bernhart, P.E.


I work as a development engineer for AMP - Tyco Electronics located near Harrisburg, PA. I help design interconnections and electrical connectors for aerospace applications.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor