28911982
Mechanical
- Jul 21, 2003
- 5
I am attempting to model the blank mould during parison forming.(ie Glass bottle manufacture)
The model involves the following
Transient Heat transfer - 5 second cycles
Glass @ 1200 degrees
An air gap 0.2mm
Blank mould - cast iron
Forced Convection on blank mould fins
Has anybody got any experience in the modelling of the parison and blank mould with FEA packages such as ANSYS?
The model involves the following
Transient Heat transfer - 5 second cycles
Glass @ 1200 degrees
An air gap 0.2mm
Blank mould - cast iron
Forced Convection on blank mould fins
Has anybody got any experience in the modelling of the parison and blank mould with FEA packages such as ANSYS?
