Trvscouch
Structural
- Jun 2, 2015
- 2
The project I'm currently at decided to start adding glenium 7500 onsite instead of water. I have noticed that after the glenium is added, the air percentile increases from 2 to 10% in addition. I was told that it will disapate fairly fast but it takes about 20 minutes. We had a truck last week that arrived with a 6% air before glenium and 15% after 64 oz of glenium was added with an additional 25-30 more revolutions. We took a sample to see if it would effect the breaks and the numbers are significantly lower compared to the other tests. Do this sound correct?