Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Glued Wood Decking Diaphragms

Status
Not open for further replies.

RARWOOD

Structural
Jun 17, 2004
519
Is anyone still specifing glued wood diaphragns, and if so what adhesive are you specifing?
 
Replies continue below

Recommended for you

Here's an earlier thread that discusses this a bit:

thread507-106592

 
Thank you for the reference. I've both read and posted to that thread.

The problem that exists today is that the 3M 5230 glue which was used in the testing and listed in the IBCO reports, is no longer available. Also when I checked with 3M they indicated they did not have another product equivalent to the 5230.

I know some people have used Miracle adhesive available through Tectum. I was just trying to find out if any one was using other adhesives.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor