Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gold mining

Status
Not open for further replies.

rommar

Mechanical
Feb 5, 2009
21
0
0
SR
I'm looking for information about gold mining such as how to start, processes, equipments etc.

thanks

RM
 
Replies continue below

Recommended for you

Well firstly you need to locate the gold deposit, then with a pick and shovel you start digging followed by washing all the excess dirt from the gold. At this point if you find a lot of gold contact one of the big mining companies and all your questions will be answered.

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
Alternatively, go back to school, study mining enginneering for 4 year, dont bother getting an M.Sc or MBA, rather go into the industry for 10-12 years , solely to learn that it isnt as easy as it looks, plus the fact that your 4 years in school really only taught you enough to start learnig what its all about, thenand only then, go find soe prospective ground and start spending your hard earned savings.
 
Status
Not open for further replies.
Back
Top